When you’re building from the ground up, the electrical system sets the foundation for everything that follows. You need new construction wiring that’s safe, future-ready, and installed on schedule so other trades can keep moving.

We provide professional new construction wiring across the Dallas–Fort Worth (DFW) metroplex and the Possum Kingdom Lake area, working with homeowners, builders, and general contractors on residential and light commercial projects.

Good new construction wiring is about more than just passing inspection. Done right, it gives you:

• Safe, code-compliant power throughout the property
   
• Enough capacity for today’s loads and tomorrow’s upgrades
   
• Smart placement of outlets, lighting, and circuits based on real-life use
   
• Clean, organized panels that are easy to service later
   

Whether it’s a single-family home, a lake house at Possum Kingdom, or a small commercial space, we wire it like we’re going to live or work there ourselves.

We handle the entire electrical scope from the first rough-in to the final punch list.

Starting a new build or addition?

We can help with:

• Electrical layout for outlets, lighting, and dedicated circuits
   
• Panel sizing, service sizing, and load calculations
   
• Placement of switches, dimmers, and smart controls
   
• Planning for future needs (EV chargers, hot tubs, generators, etc.)
   

If you already have plans from your architect or designer, we’ll install to spec and make recommendations where needed.

Rough-in is where the backbone of your system is built:

• Running branch circuits to all outlets, fixtures, and equipment
   
• Routing home runs to panels and sub-panels
   
• Installing junction boxes, fan boxes, and can light housings
   
• Setting up circuits for HVAC, appliances, and special loads
   

We work closely with the GC and other trades to keep rough-in on schedule and avoid conflicts with framing, plumbing, and HVAC.

Your electrical service and panels must match the demands of the building:

• Main service installation and upgrades (200A, 320A, 400A, etc. as needed)
   
• Main panels and sub-panels installed and labeled clearly
   
• Proper grounding and bonding per NEC and local codes
   
• Dedicated spaces for future circuits and expansions
   

We design service and panel layouts that are clean, organized, and easy to work on down the road.

Lighting is a big part of new construction electrical:

• Circuits for interior and exterior lighting
   
• Recessed can lights, feature fixtures, and accent lighting
   
• Switch locations that make sense for how people move through the space
   
• Dimmer switches and smart controls where appropriate
   

We’ll help ensure each room has the right type and amount of light from day one.

Modern homes and businesses rely on lots of heavy-draw equipment. We install:

• Dedicated circuits for ovens, ranges, microwaves, and refrigerators
   
• Laundry circuits for washers and dryers
   
• HVAC, tankless water heaters, and other mechanical loads
   
• Garage/shop power, EV chargers, hot tubs, and pool equipment
   

We size wire and breakers correctly to manufacturer specs and future load expectations.

Once the walls are in, we come back to:

• Install outlets, switches, dimmers, and cover plates
   
• Hang and connect light fixtures, fans, and recessed trims
   
• Install and connect appliances, if included in scope
   
• Label panel schedules and verify all circuits function properly
   

We finish cleanly and leave the job ready for final inspection and move-in.

We wire:

• Custom homes and spec builds
   
• Additions and major remodels
   
• Lake homes and vacation properties at Possum Kingdom
   
• Barndominiums and rural properties
   

We focus on practical, livable layouts: plenty of outlets, logical switch locations, and capacity for the way people really live in North Texas homes.

For light commercial projects, we provide:

• Electrical service and distribution for offices and retail spaces
   
• Circuits for lighting, signage, and specialty equipment
   
• Code-compliant wiring for kitchens, break rooms, and bathrooms
   
• Coordination with HVAC, IT, and low-voltage trades
   

We understand scheduling, inspections, and the need to get your business open on time.

New construction wiring must be built to code from the ground up. Our licensed electricians:

• Follow the latest NEC and local electrical codes for DFW and Possum Kingdom jurisdictions
   
• Pull necessary permits and coordinate inspections at each stage
   
• Use proper materials, box sizes, and support methods for long-term safety
   
• Pay attention to grounding, bonding, and AFCI/GFCI protection where required
   

We wire right the first time so you’re not chasing problems after the walls are closed up.

Building or expanding near Possum Kingdom Lake often means:

• Multi-level decks, outdoor kitchens, and lake-view living areas
   
• Detached garages, shops, and boat storage
   
• Dock power, hot tubs, and pool equipment
   

We can design and wire the main structure and coordinate with plans for:

• Exterior and landscape lighting
   
• Dock and waterfront electrical (within local regulations)
   
• Standby generators, solar, and other upgrades
   

You get a lake home that’s set up for how you really use it on weekends and holidays.

• Electrical planning and layout support
   
• Rough-in wiring for new homes and light commercial
   
• Main service, panels, and sub-panels
   
• Interior and exterior lighting circuits
   
• Dedicated circuits for appliances and equipment
   
• Trim-out, fixtures, devices, and final connections
   
• Code corrections and inspection support
   

From the first outlet box to the final breaker label, we handle your new construction wiring start to finish.

We provide new construction wiring services across:

• Dallas–Fort Worth Metroplex – Dallas, Fort Worth, Arlington, Plano, Frisco, McKinney, and surrounding cities
   
• Possum Kingdom Lake – Lake homes, cabins, and waterfront properties around PK Lake
   
• Nearby North Texas suburbs and rural building sites
   

If you’re not sure whether your project site is in our area, just call or text and we’ll confirm.

Planning a new build, addition, or commercial project? Need a reliable electrical contractor who shows up, communicates, and keeps you on schedule?

Call or text for a new construction electrical bid in DFW and Possum Kingdom Lake.

We’ll review your plans, walk the site if needed, and provide a clear, detailed estimate so you can move forward with confidence, knowing your new build will have a safe, future-ready electrical system.

Q: When should I bring an electrician into my new construction project?

Ideally, you should involve a licensed electrician during planning and before framing is finalized. That way, outlet, lighting, and panel locations can be coordinated with the structure and other trades.

Q: Can you help design the electrical layout for my new home or lake house?

Yes. We can review your plans, make recommendations on outlet placement, lighting layouts, panel sizing, and future-ready circuits (EV, hot tub, generator, etc.), and then install the system to code.

Q: Do you handle permits and inspections for new construction wiring?

Absolutely. We pull the necessary permits, coordinate rough-in and final inspections, and ensure all work meets NEC and local code requirements for the DFW and Possum Kingdom areas.

Q: Do you wire both residential and light commercial new builds?

Yes. We provide new construction wiring for single-family homes, lake homes, barndominiums, and light commercial spaces throughout DFW and Possum Kingdom Lake.

Extended thinkingChatGPT can make mistakes. OpenAI doesn't use J B's Workspace workspace data to train its models.